• V-Belt Pulleys

    V-Belt Pulleys

    V-belt pulleys (also called v- belt sheaves) are devices which transmit power between axles by the use of a v-belt, a mechanical linkage with a trapezoidal cross-section. Together these devices offer a high-speed power transmission solution that is resistant to slipping and misalignment.  V-belt pulleys are solely used for transmitting power between two parallel axels. The most notable difference between a v-belt pulley and other types of pulleys (round belt, flat, etc.) would be the geometry...
  • taper bore v-pulleys SPZ

    taper bore v-pulleys SPZ

    SPZ-1  SPZ-2  SPZ-3  SPZ-4  SPZ-5  SPZ-6  SPZ-8   SPZ V belt pulley 1. Material: Cast iron GG25, Ductile iron 2. Process: Machining – phosphating 3. Standard: European and American Standard V pulley, v belt pulley, v groove pulley, v groove belt pulley, taper lock pulley, taper lock v belt pulley, taper lock bushing pulley, taper lock pulleys / taper bore pulley, large v belt pulley, double v belt pulley, cast iron v belt pulley belt pulley, variable speed v belt pulleys, v belt pu...
  • taper bore v-pulleys SPA

    taper bore v-pulleys SPA

    Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and benchmark diameter selection;  The slot Angle of the belt ...
  • taper bore v-pulleys SPB

    taper bore v-pulleys SPB

    SPB-1  SPB-2  SPB-3  SPB-4  SPB-5  SPB-6   SPB-8  SPB-10 Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and b...
  • taper bore v-pulleys SPC

    taper bore v-pulleys SPC

    SPC-3  SPC-4  SPC-5  SPC-6  SPC-8  SPC-10 Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and benchmark diamet...